Includes:

-Command
-Tension regulator
-Switch board with antenna.
-Plastic box

Kit valid for voltages up to 90v, it is not necessary to install the regulator if the board voltage never exceeds 30v, for higher voltages it is necessary to install the voltage regulator.

Skateboard installation:

You have to feed the voltage regulator with the battery/contact voltage (if you have one) and this feeds the switching board, as in the diagram in the image. In cases where the battery voltage does not exceed 30v, it is not necessary to install the voltage regulator.
To carry out the limitation it is necessary that the controller has a limitation cable, if it does not have it, it is not compatible.
One of the ends of the controller limitation cable must be connected to the common of the switching board and the other can be connected to NO or NC, depending on whether we want the skate to turn on limited (NC) or limited (NO). ).

For more information see the product image.